Select ‘pre-auth completion’
If cashiers are enabled, enter the cashier (user) ID
If the cashier requires a PIN, enter the cashier’s PIN
Enter the amount for completion and press ‘OK’ (O)
If requested, enter the reference number to print on the receipt
The POS device will display ‘please pass to customer’
The POS device will return to the idle screen
If requested, enter the invoice number to print on the receipt
Enter the authorisation code, which was received from the bank and
printed on the pre-authorisation to be completed
9. PRE-AUTHORISE COMPLETION
STEP 1
STEP 4
STEP 2
STEP 5
STEP 3
STEP 6
STEP 7
STEP 8
STEP 9
STEP 10
Press the # key or tap on the screen for the transaction list
If the amount is more than 15% of the original transaction value, then invalid
amount is displayed.
This transaction is not supported by contactless.
If prompted, the customer must enter his/her PIN
STEP 11
To Next Page
Loading...
Need help?
General
