VX 520 REFERENCE GUIDE 15
CHAPTER 2
Terminal Setup
This chapter describes the terminal setup procedure. You will learn about:
• Selecting Terminal Location
• Unpacking the Shipping Carton
• Examining Terminal Features
• Installing the Smart Battery (VX 520 GPRS Only)
• Establishing Telephone Line Connections
• Installing the Paper Roll in the Printer
• Installing/Replacing MSAM Cards
• Installing/Replacing SIM Card (VX 520 GPRS Only)
• Connecting Optional Devices
• Connecting the Terminal Power Pack
• Charging the Smart Battery (VX 520 GPRS Only)
• Privacy Shield (Optional)
• Using the Smart Card Reader
• Using the Magnetic Card Reader
Selecting
Terminal
Location
Use the following guidelines when selecting a location for your VX 520 terminal.
Ease of Use
• Select a location convenient for both merchant and cardholder.
• Select a flat support surface, such as a countertop or table.
• Select a location near a power outlet and a telephone/modem line connection.
For safety, do not string the power cord in a walkway or place it across a
walkway on the floor.
Environmental
Factors
• Do not use the terminal where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the terminal away from direct sunlight and anything that radiates heat,
such as a stove or motor.
To Next Page
Loading...
Need help?
General
