PERFORMING DOWNLOADS
Download from a USB Flash Drive
VX 520 R
EFERENCE GUIDE 143
USB Flash Drive
Download
Procedure
To begin downloading from a USB flash drive, insert the flash drive into the USB
port of the VX 520 terminal and follow the instructions on Table 22.
Table 22 USB Flash Drive Download Procedure
Step Display Action
1
VERIX TERMINAL MGR
DOWNLOAD
GROUP ID: nn
Enter the target file group for the download.
FILE GROUP _1 (Group 1) is displayed as the
default selection.
Note: File Group 1 is reserved for the
operating system. Try using a
different file group when downloading
additional applications. For more
information on operating system
downloads, see Direct Operating
System Downloads.
To select a file group other than Group 1, type
the one or two-digit number of the desired file
group (2–15) for the download.
2
VERIX TERMINAL MGR
DOWNLOAD
GROUP n PASSWORD
__________
Enter the password of the selected file group.
For example, if Group 2 is the target group,
the
GROUP _2 PASSWORD message is
displayed.
Note: If you have not previously entered a
group’s password in this session, the
terminal prompts for the group’s
password prior to downloading
applications.
To continue, enter the required password. If
you enter an incorrect password,
PLEASE TRY AGAIN appears.
Press . Verify your password and reenter
it.
3
VERIX TERMINAL MGR
DOWNLOAD Gnn
1> SINGLE-APP
2> MULTI-APP
Select 1> SINGLE-APP to download a single
application.
Select
2> MULTI-APP to download multiple
applications.
To Next Page
Loading...
Need help?
General
