5.2 How to print a Pre-Selement report
This funcon will print a report of all transacons performed since the last selement,
without reseng the totals.
5.3 How to Reprint Last Selement
This funcon will reprint the last selement which has occurred.
PRE-SETTLEMENT
APPROVED
Start by iniang the transacon via the POS interface.
An “APPROVED” message will display when the pre-
selement report is successful.
Terminal Screen Next Step
LAST SETTLEMENT
Please Wait
LAST SETTLEMENT
APPROVED
Start by iniang the transacon via the POS interface.
Then, wait for the processing screen to complete.
An “APPROVED” message will display when the last
selement report is successful.
Terminal Screen Next Step