Vertical Express LD-16 - Adjust Door Contacts and Door Lock Contact (Relating Cable Adjustment)

LD-16 Door Operator - Modernization New/Existing Car Door Panel Installation
October 2021 - 88420 v.1.0
45
New/Existing Car Door Panel Installation
(continued)
Figure 40 - Assemble and Align Door Panel and Angle (2 of 2)
Typical Attachment Method:
Adapter to Door
Finished Face
Car Side
Existing Tapped
Pendant Bolt Holes
½" HARDWARE INSTALLATION
Existing
Car Door
Adapter Angle
ƻȚ HARDWARE INSTALLATION
Shim (if needed)
to align/plumb
the car door
Finished Face
Car Side
Existing Tapped
Pendant Bolt Holes
Adapter Angle
Shim (if needed)
to align/plumb
the car door
Existing
Car Door