Vertiv™ CoolPhase CDU Installer/User Guide
Technical Support Site
If you encounter any installation or operational issues with your product, check the pertinent section of this
manual to see if the issue can be resolved by following outlined procedures.
Visit https://www.vertiv.com/en-us/support/ for additional assistance.
The information contained in this document is subject to change without notice and may not be suitable for all
applications. While every precaution has been taken to ensure the accuracy and completeness of this
document, Vertiv assumes no responsibility and disclaims all liability for damages resulting from use of this
information or for any errors or omissions.
Vertiv recommends installing a monitored fluid detection system that is wired to activate the automatic
closure of field-installed coolant fluid supply and return shut off valves, where applicable, to reduce the amount
of coolant fluid leakage and consequential equipment and building damage. Refer to local regulations and
building codes relating to the application, installation, and operation of this product. The consulting engineer,
installer, and/or end user is responsible for compliance with all applicable laws and regulations relating to the
application, installation, and operation of this product.
The products covered by this instruction manual are manufactured and/or sold by Vertiv. This document is
the property of Vertiv and contains confidential and proprietary information owned by Vertiv. Any copying,
use, or disclosure of it without the written permission of Vertiv is strictly prohibited.
Names of companies and products are trademarks or registered trademarks of the respective companies. Any
questions regarding usage of trademark names should be directed to the original manufacturer.
Vertiv™ CoolPhase CDU Installer/User Guide
To Next Page
Loading...
