The Liebert Liqui-tect® 410 Point Leak Detection Sensor detects the presence of conductive liquid using
a pair of corrosion-resistant, gold-plated probes mounted in a painted, height-adjustable enclosure. Dual
Form-C, dry contact common alarm relays (rated at 24VAC, 3A) signal a leak detected as well as loss of
power and cable fault. The Liebert Liqui-tect 410 requires an external 24VAC or 24VDC power source.
Liebert LT460 Zone Leak Detection Kits include one LT460 sensor, a specified length of LT500-xxY
cable (maximum length is 100 ft [30.5m]) and a corresponding number of hold-down clips. The Liebert
LT460 requires an external 24VAC, 0.12A power source, such as EXT-XFMR or XFMR24.
Liebert SiteScan
®
is a monitoring solution that gives you decision-making power to effectively manage
the equipment critical to your business.
Liebert SiteScan enables communication from Liebert Precision Cooling and Power Protection units, as
well as many other pieces of analog or digital equipment, to a front-end software package that provides
real-time status and alarms so you can react quickly to changing situations.
Liebert SiteScan is designed with flexibility for both small systems and large, complex systems such as
those in computer rooms, telecommunications facilities or industrial process control rooms. Contact your
local Vertiv™ representative for assistance with a Liebert SiteScan system.
The NIC-ENCL1 and NIC-ENCL2 package one or two Liebert IntelliSlot® Web/485 Cards with Adapters,
respectively, in one steel enclosure for installation external to the Liebert Mini-Mate2. The Liebert
IntelliSlot Web/485 Card with Adapter provides communication with the Liebert Mini-Mate2™ via SNMP,
HTTP, RTU Modbus 485 and BACnet IP. The self-contained kit includes an external 120VAC-to-24VAC
transformer as a power source. Wiring harnesses are not provided. Power and communication wiring are
field-provided.
Vertiv | Liebert Mini-Mate2—5 ton User Manual| 24
To Next Page
Loading...
