Vertiv Liebert Mini-Mate2 - Maintenance Inspection Checklist; Liebert Mini-Mate2 Inspection Checklist

12 MAINTENANCE INSPECTION CHECKLIST
Liebert Mini-Mate2
Date:________________________________ Prepared By:_______________________________
Model #:____________________________ Serial Number:_____________________________
NOTE: Reheat element sheaths and fins are manufactured with stainless steel. Regular inspections are
necessary to assure proper cleanliness of the reheating element. Should inspection reveal corrosion
particles on the reheating element or adjoining surfaces (including ducts and plenums), appropriate
cleaning should be performed. Periodic reheating element replacement may be required to meet
specific application requirements.
Monthly
Filters
1. Check for restricted airflow
2. Check for filter
3. Wipe section clean
Fan Section
1. Impellers free of debris and move
freely
2. Bearings in good condition
3. Check belt tension and condition
Humidifier
1. Check canister for mineral deposits
2. Check condition of electrodes
3. All hoses and fittings tight
4. Check water make-up valve for leaks
Drain lines
1. Check for obstructions and sediment buildup.
2. Check for damage and/or corrosion.
3. Check for leaks
Vertiv | Liebert Mini-Mate2—5 ton User Manual| 85