Vertiv Liebert Mini-Mate2 - Default Chapter; Table of Contents

TABLE OF CONTENTS
1 Important Safety Instructions 7
2 Product Model Information 9
3 Introduction 15
3.1 Designed to Match Computer and Electronic Equipment Needs—From Installation to Operation 15
4 Standard Features—5 Ton Systems 17
4.1 Evaporator Section—Split System 17
4.2 Condensing Unit Section—Split System 17
4.2.1 Indoor Centrifugal Fan Condensing Units 17
4.2.2 Outdoor Prop Fan Condensing Units 17
4.2.3 Indoor Water/Glycol Condensing Units 17
4.3 Chilled Water Units 17
4.4 System Controls 18
4.4.1 Other Standard Control Features 18
5 Optional Factory-Installed Features - Evaporator/Chilled Water Units 19
5.1 Reheat 19
5.2 Humidifier 19
5.3 Sensors 19
5.4 Switches and Motors 19
5.5 Free-Cooling 20
5.6 Optional Configurations—Prop Fan Condensing Units 20
5.7 Optional Configurations—Water/Glycol Condensing Units 21
5.8 Optional Configurations—Chilled Water Units 21
6 Ship-Loose Accessories—Field-Installed 23
6.1 Remote Monitoring, Autochangeover and Leak Detection Equipment 23
7 Site Preparation and Installation 25
7.1 Installation Considerations 25
7.1.1 Room Preparation 26
7.1.2 Location Considerations 26
7.2 Ceiling Unit Weights 28
7.3 Equipment Inspection Upon Receipt 28
7.4 Installing the Ceiling Units 28
7.4.1 Close Coupled Installations 29
7.4.2 Evaporator Air Distribution 29
7.4.3 Piping Connections and Coolant Requirements 30
7.4.4 Electrical Connections 36
7.5 Indoor Air-Cooled Centrifugal Fan Condensing Unit Installation 39
7.5.1 Location Considerations 39
7.5.2 Electrical Connections 39
7.5.3 Piping Connections 40
7.5.4 Ducting 40
Vertiv | Liebert Mini-Mate2—5 ton User Manual | 3