Active alarms are displayed on the LCD screen and sound an audible beeper. To silence an alarm, press
the Alarm Silence/Help key as prompted on the display.
Setpoints, DIP switch settings and other selections were made during factory testing of your unit and are
based on typical operating experience. (Other default selections were made according to options
included with your unit). MAKE ADJUSTMENTS TO THE FACTORY DEFAULT SELECTIONS ONLY IF
THEY DO NOT MEET YOUR SPECIFICATIONS.
Allowable ranges are displayed by pressing the Help key. A password will be required (if enabled) to
change setpoints, time delays, etc.
The display normally shown includes the present room temperature, humidity, active status functions
(cooling, heating, dehumidifying, humidifying) and active alarms. The Status Display may also be selected
from the Main Menu.
8.2 Main Menu <Menu>
Press the MENU key to display the Main Menu. The menu selections (in the following order) include:
• SETPOINTS
• STATUS
• ACTIVE ALARMS
• TIME
• DATE
• SETBACK
• SETUP OPERATION
• SET PASSWORD
• SETUP PASSWORD
• CALIBRATE SENSOR
• ALARM ENABLE
• ALARM TIME DELAY
• COM ALARM ENABLE
• CUSTOM ALARMS
• CUSTOM TEXT
• DIAGNOSTICS
• END OF MENU
Use the UP and DOWN arrows to scroll through the selections; when ready to select a particular function
press Enter.
Vertiv | Liebert Mini-Mate2—5 ton User Manual| 56
To Next Page
Loading...
