10.2.2 High Temperature Sensor
The optional high temperature sensor is a bi-metal operated sensing device with a closed switch under
normal conditions. Connected between pins 1-8 and 1-9, this device will shut down the entire unit.
10.2.3 Smoke Sensor
The optional smoke sensor constantly samples return air through a tube. Its power supply is located in the
electric panel. The smoke sensor shuts down the unit upon detecting smoke, and activates visual and
audible alarms. This smoke sensor is not intended to function as or replace any room smoke detection
system that may be required by local or national codes. Locate the source of the smoke and follow
appropriate emergency procedures.
Vertiv | Liebert Mini-Mate2—5 ton User Manual| 74
To Next Page
Loading...
