• Admin
• Poweruser
• System User
• Custom User
Groups
An administrator can create a custom group and assign receptacles to users in the custom group. A user in a custom group
is able to view only the receptacles to which he is given access; the other receptacles do not appear. A user in a custom
group can lock and unlock only the receptacles he has access to. A user can belong to more than one group. Members can
be added or deleted from any group, but none of the default groups, (administrator, power user or system user) can be
deleted.
NOTE: Only one group can be modified at a time.
To add a group:
1. From the System tab’s navigation tree, click Authorization - Groups.
2. To add a group, click the Add icon in the upper-left of the window, then enter the name for the new group.
3. Set the access level for members of the group by granting access to receptacles.
4. Click the Save icon.
To delete a group:
1. Check the box next to the group to be deleted.
2. Click the Delete icon.
To add a user to a group:
1. From the System tab’s navigation tree, click Authorization - Groups.
2. Check the box next to the group to be edited.
3. Click the Edit User icon.
4. In the Local User List or the Remote User List, select the user to be added and click the right arrow.
5. Click the Save icon.
To delete a user from a group:
1. From the System tab’s navigation tree, click Authorization - Groups.
2. Check the box next to the group to be edited.
3. Click the Edit User icon.
4. In the Group User List, select the user to be removed and click the left arrow.
5. Click the Save icon.
To add a user to a group:
1. From the System tab’s navigation tree, click Authorization - Groups.
2. Check the box next to the group to be edited.
3. Click the Edit User icon.
4. In either the Local User List or the Remote User List, select the user to be added and click the right arrow.
5. Click the Save icon.
To delete a user from a group:
1. From the System tab’s navigation tree, click Authorization - Groups.
2. Check the box next to the group to be edited.
3. Click the Edit User icon.
4. In the Group User List, select the user to be removed and click the left arrow.
Vertiv | RPC2™ Communications Module Installer/User Guide | 33
To Next Page
Loading...
