17
CALL BARRING
Call barring is a network service that allows you to
restrict the incoming and outgoing calls that you
make and receive. Contact your service provider
for more information about using this function.
When outgoing calls are barred, calls may be
possible to the emergency number programmed
into your Vertu phone, for example 112, 911 or
other official emergency number.
To enable or disable call barring:
> From the stand-by display, press Menu.
> Scroll to Settings and press Select.
> Scroll to Security settings and press Select.
> Scroll to Call barring service and press
Select.
> Scroll to one of the following six options then
press
Select:
Outgoing calls to bar all outgoing calls.
International calls to bar all international
calls.
Int. calls except to home country to bar
all international calls with the exception of calls
made to your home country (defined by your
service provider) when abroad.
Incoming calls to bar all incoming calls.
Incoming calls when abroad to bar all
incoming calls when you are abroad.
Cancel all barrings to cancel all call bars.
Simply enter your barring password when
prompted and press
OK.
> Scroll to Activate to enable the bar, Cancel to
disable it, or
Check status to view the status of
the current bar, then press
Select.
> If you are enabling or disabling a bar, you must
enter your barring password when prompted then
press
OK. A confirmation message is displayed.
Refer to “Access Codes” on page 18 for more
information about changing your barring password.
FIXED DIALLING
Fixed dialling is a network service that allows you to
restrict outgoing calls to only the numbers you
specify in a fixed dialing list. Contact your service
provider for more information about using this
function.
When fixed dialing is enabled, calls may be
possible to the emergency number programmed
into your Vertu phone, for example 112, 911 or
other official emergency number.
To enable or disable fixed dialling:
> From the stand-by display, press Menu.
> Scroll to Settings and press Select.
> Scroll to Security settings and press Select.
> Scroll to Fixed dialling and press Select.
> Scroll to On to restrict calls to the fixed dialing list,
Off to disable fixed dialing, or Number list to
view the numbers in your fixed dialing list, then
press
Select.
If you are using fixed dialing for the first time, it
is recommended that your select
Number list
to add numbers to your list before enabling fixed
dialing. You will receive two warning messages.
> When prompted, enter your PIN2 code and press
OK.
> Either enter your number manually then press OK,
or press
Search to select a name from your
contacts list and then press
Select.
If you entered a number manually, enter a name
for the number and press
OK.
> A confirmation message is displayed and you are
returned to the fixed dialling list. Add addtional
numbers to your list in the same way. Press
Back
when you have completed your list.
> Scroll to On to enable fixed dialing.
You need to key in the barring password to set
up the call barring service. To obtain the barring
password, contact your service provider.
You will need to key in the PIN2 code to save
and edit numbers in the fixed dialling list or to
call numbers not in the list. The PIN2 code is
supplied with some SIM cards. For more
information contact your service provider.
When fixed dialing is on, GPRS connections
are not possible except while sending text
messages over a GPRS connection. In this
case, the recipient’s phone number and the
message center number must be included in
the fixed dialing list.
You cannot access SIM memory manually
(view or copy numbers on the SIM card) while
fixed dialing is active.
To Next Page
Loading...
