30
Include signature to define a signature that
is automatically added to the end of each e-mail,
when you write your message.
Use SMTP authorisation to specify if your
e-mail service provider requires authentication
for sending e-mails.
SMTP user name to enter the user name
used for sending outgoing mails. If you do not
enter an user name, the POP3 or IMAP4 user
name is used instead.
SMTP password to enter the password used
for sending outgoing mails. If you do not enter a
password, the POP3 or IMAP4passworde is
used instead.
Outgoing SMTP port to enter the number of
the e-mail server port for outgoing e-mail. The
most commonly used port number is 25.
Incoming POP3 port or Incoming IMAP4
port
to enter the port number that you have
obtained from your e-mail provider.
Reply-to address to enter an alternative e-
mail address for replies to your messages.
Secure login to specify that your connection
requires an encrypted login (POP3 servers
only). Contact your e-mail provider if you are
uncertain. Using encrypted login enables
increased security for user names and
passwords. It does not increase security for the
connection itself.
Retrieve e-mails to enter the maximum
number of e-mails that you want to retrieve at a
time.
Retrieval method to control how messages
are received. Select
Latest to retrieve all new
received e-mails, or select
Latest unread to
retrieve only e-mails that you have not read.
SMTP connection settings to define the
connection settings required for outgoing e-
mail.
POP3 connection settings or IMAP4
conn. settings
to define the connection
settings for incoming e-mail transfer:
Proxies to enable or disable proxy handling.
Primary proxy and Secondary proxy to
specify the IP address and port of the proxy
servers.
Data bearer to specify the data transport
mechanism (always
GPRS).
Bearer settings to specify the following
data transport settings:
GPRS access point to specify the
access point that will process your login/
connection.
Authentication type to select either
Normal or Secure authentication.
User name to specify the login user
name.
Password to specify the login password.
WRITING AND SENDING E-MAIL MESSAGES
You can create e-mail messages containing up to
5000 basic text characters (less for complex
languages). You cannot add attachments.
To write and send an e-mail message:
> From the stand-by display, press Menu.
> The Messages menu is shown, press Select.
> Scroll to E-mail and press Select. The e-mail
application is started.
> Create e-mail is highlighted, press Options.
> Select is highlighted, press Select.
> The E-mail address area is highlighted, press
Options.
> Edit is highlighted, press Select.
> Enter the e-mail address, or press Options then
highlight
Search and press Select to retrieve an
e-mail address from your contacts. Press
Options, OK is highlighted then press Select.
> Highlight the Subject: area then press
Options.
> Edit is highlighted, press Select. Enter the
subject of your message. Press
Options, OK is
highlighted then press
Select.
> Press Options, scroll to Message editor and
press
Select. Compose your e-mail, leaving
enough space in the total character count for the
e-mail address.
Due to the complexity of entering all of the
above settings manually, it is strongly
recommended that you use the automatic
settings message to obtain your settings.
To Next Page
Loading...
