39
> Scroll to Anykey answer, the current setting is
shown, press
Select.
> Highlight On to enable anykey answer, or Off to
disable it, then press
Select.
Automatic redial
Occasionally, your network may experience heavy
traffic and your call may not be established. With
automatic redial activated, your phone redials the
number up to 10 times, and notifies you once the
network is available.
To change the automatic redial setting:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Call settings and press Select.
> Scroll to Automatic redial, the current setting
is shown, press
Select.
> Highlight On to enable automatic redial, or Off to
disable it, then press
Select.
Speed dialling
Single key speed dialling enables you to quickly
dial a number by pressing and holding a single key.
To change the speed dialling setting:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Call settings and press Select.
> Scroll to Speed dialling, the current setting is
shown, press
Select.
> Highlight On to enable speed dialling, or Off to
disable it, then press
Select.
Call waiting
If supported by your service provider, call waiting
notifies you of an incoming call even while you are
in a call. You can accept, reject, or ignore the
incoming call.
To change the call waiting setting:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Call settings and press Select.
> Scroll to Call waiting and press Select.
> Highlight Activate to enable call waiting,
Cancel to disable it, or Check status to display
the current setting, then press
Select.
To use the call waiting feature:
> When you have a call in progress and you receive
an incoming call, an audible alert is generated and
the display indicates that another call is waiting.
Press the send key to answer the call. The person
you were speaking to is put on hold. Call waiting
may not work correctly if
Divert if busyis set.
> Press the SEND key to swap between the calls. A
confirmation message is displayed. The person on
hold becomes the active call, and the other person
is put on hold.
> Press the END key to end the active call. A
confirmation message is displayed and the other
call becomes active.
> Press Options then scroll to End all calls and
press
Select to end all calls.
Summary after call
Your phone can display the time spent on a call
when you hang up.
To change the call summary setting:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Call settings and press Select.
> Scroll to Summary after call, the current
setting is shown, press
Select.
> Highlight On to enable summary after call, or Off
to disable it, then press
Select.
Send my caller identity
You can prevent your number from being displayed
on the receiving party’s caller ID. This feature is a
network service and works on a call-by-call basis.
Contact your service provider for more information.
Emergency services and authorised agencies may
be able to obtain your caller ID even when disabled.
To change your caller ID setting:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Call settings and press Select.
> Scroll to Send my caller ID, the current setting
is shown, press
Select.
> Highlight set by network to let the network
determine if your number is sent,
On to always
enable your number to be sent, or
Off to disable it,
then press
Select.
PHONE SETTINGS
Language
Depending upon the location where your Vertu
phone was purchased, it may provide support for
multiple languages.
To change your phone’s language setting:
To Next Page
Loading...
