35
05 PROFILES AND SETTINGS
You can use the profiles and settings menus to
change your personal shortcuts, time and date
settings, call settings, phone settings, display
settings, tone settings, enhancement settings,
security settings, and to restore factory settings.
Profiles are an easy way to control the most
common groups of settings such as audible and
vibrating alerts. Activating alternative profiles
changes all the associated settings quickly and
easily.
All other settings related to how your Vertu phone
operates are managed by through the settings
menu.
PROFILES
Profiles define how your phone reacts when you
receive a call or a message, how your keypad
sounds when you press a key, and more. Ringing
options, keypad tones, and other settings for each
of the available profiles can be customised to suit
your needs.
To help you identify which profile is active, an icon
is shown in the stand-by display, below the signal
and battery strength indicators. Refer to “Active
profile icons” on page 6 for more information.
ACTIVATING A PROFILE
You can change your profile at any time to ensure
that your Vertu phone’s alerts are appropriate to
your surroundings.
Timed profiles can be used to prevent missed calls.
For example, suppose you attend an event that
requires your phone be set to
Silent before the
event starts, but you forget to return it to
General
until long after the event. During this time, you have
missed several calls because the ringing tone was
silent.
With the timed profile feature, you can set a profile
to expire after any length of time up to 24 hours.
When the timed profile expires, your phone
automatically returns to the original profile.
To quickly change your current profile from the
stand-by display:
> Press the POWER key once briefly.
> Scroll to the desired profile then press OK. A
confirmation message is displayed.
To change your current profile using the menus:
> From the stand-by display, press Menu.
> Scroll to the Profiles menu then press Select.
> Scroll to the desired profile then press Select.
> Highlight Activate to use your new profile
indefinitely or highlight
Timed to use the new
profile for a limited time only, then press
Select.
> If you selected a timed profile, enter the time when
you want your new profile selection to end then
press
OK.
> A confirmation message is displayed and your
new profile icon is displayed.
PERSONALISING A PROFILE
You can customize the default profiles to adjust
your Vertu phones characteristics best suit your
own preferences and situation.
To personalise a standard profile:
> From the stand-by display, press Menu.
> Scroll to the Profiles menu then press Select.
> Scroll to the profile you want to customise then
press
Select.
> Highlight Personalise then press Select.
> Scroll to one of the following options then press
Select to customise the setting:
Incoming call alert to select how the phone
notifies you of an incoming call. You can choose
Ringing to play the ringing tone, Ascending if
you want the volume of the ringing tune to start
low and increase the longer the call is
unanswered,
Ring once to play only one cycle
of the ringing tone,
Beep once or Off (no
audible alert for an incoming call).
Ringing tone to select the ringing tone for
incoming calls. If you pause for a couple of
seconds as you scroll through the available
ringing tones, a sample of the tone is played.
Ringing volume to set the volume of your
ringing tone (1=low, 5=very loud).
Vibrating alert to turn the vibrating alert on or
off.
Message alert tone to select the tone for
received messages.
To Next Page
Loading...
