34
To reset the call duration timers:
> From the stand-by display, press Menu.
> Scroll to the Call register menu then press
Select.
> Scroll to Call duration then press Select.
> Scroll to Clear timers then press Select.
> Enter your security code when prompted then
press
OK. You cannot undo this operation.
DATA AND MESSAGES
The call register stores information about the
volume of data sent and received in the last GPRS
connection and in total. Additionally the duration of
the last connection and the total of all GPRS data
connections are stored. The number of messages
sent and received are also stored.
DATA COUNTER
To view the information about the volume of data
sent and received via GPRS:
> From the stand-by display, press Menu.
> Scroll to the Call register menu then press
Select.
> Scroll to GPRS data count. then press
Select.
> Scroll through the following to view your data
volume usage in bytes:
Data sent in last session — Shows the
volume of data sent during the last GPRS
connection.
Data received in last session — Shows the
volume of data received during the last GPRS
connection.
All sent data — Shows the volume of all
GPRS data sent.
All received data — Shows the volume of all
GPRS data received.
To reset the data volume counters:
> From the stand-by display, press Menu.
> Scroll to the Call register menu then press
Select.
> Scroll to GPRS data count. then press
Select.
> Scroll to Clear counters then press Select.
> Enter your security code when prompted then
press
OK. You cannot undo this operation.
DATA CONNECTION DURATION
To view the information about the duration of the
recent and all GPRS data sessions:
> From the stand-by display, press Menu.
> Scroll to the Call register menu then press
Select.
> Scroll to GPRS conn. timer then press
Select.
> Scroll through the following to view your data
session duration in hh:mm:ss format:
Duration of last session — Shows the
duration of the last GPRS connection.
Duration of all sessions — Shows the
duration of all GPRS connections.
To reset the data duration timers:
> From the stand-by display, press Menu.
> Scroll to the Call register menu then press
Select.
> Scroll to GPRS conn. timer then press
Select.
> Scroll to Clear timers then press Select.
> Enter your security code when prompted then
press
OK. You cannot undo this operation.
MESSAGE COUNTER
To view the number of text messages sent and
received:
> From the stand-by display, press Menu.
> Scroll to the Call register menu then press
Select.
> Scroll to Message counter then press Select.
> Scroll through the following to view your message
counters:
Sent messages — Shows the number of
messages that were sent.
Received messages — Shows the number of
messages that were received.
To reset the message counters:
> From the stand-by display, press Menu.
> Scroll to the Call register menu then press
Select.
> Scroll to Message counter then press Select.
> Scroll to Clear counters then press Select.
> Enter your security code when prompted then
press
OK. You cannot undo this operation.
To Next Page
Loading...
