40
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Phone settings and press Select.
> Phone language is highlighted and the current
setting is displayed, press
Select.
> Scroll to the desired language, or Automatic to
match the language setting of your SIM card, then
press
Select. Changing the language setting may
also change the time and date formats, depending
on the language you selected.
Memory status
You can check the amount of memory used and
currently available in your Vertu phone.
To display your phone’s memory status:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Phone settings and press Select.
> Scroll to Memory status and press Select.
> Scroll to Free memory or Used memory to
display the corresponding memory information.
Automatic keyguard
You can set the keypad of your phone to lock
automatically after a preset time delay (from 5
seconds to 60 minutes). When the preset delay
expires, the keypad locks automatically.
When the keyguard is on, calls still may be
possible to the official emergency number
programmed into your phone. Enter the emergency
number and press the S
END key.
To change your automatic keyguard setting:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Phone settings and press Select.
> Scroll to Automatic keyguard the current
setting is shown, press
Select.
> Highlight On to enable automatic keyguard, or
Off to disable it, then press Select.
> Enter the delay time before the keypad is locked
(in mm:ss format) then press
OK.
Security keyguard
You can set your phone to request the security
code each time you unlock the keyguard.
To change your security keyguard setting:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Phone settings and press Select.
> Scroll to Security keyguard, the current setting
is shown, press
Select.
> Highlight On to enable the security code
request, or
Off to disable it, then press Select.
Welcome note
You can write a welcome note that will be
displayed briefly whenever you power up your
phone.
Predictive text input cannot be used for entering
welcome note text.
To change your welcome note:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Phone settings and press Select.
> Scroll to Welcome note and press Select.
> Enter the text for the note (44 characters
maximum) then press
Options.
> Save is highlighted, press Select.
Operator selection
You may be able to manually search for another
network which has a roaming agreement with your
home service provider.
To change your operator selection setting:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Phone settings and press Select.
> Scroll to Operator selection, the current
setting is shown, press
Select.
> Highlight one of the following options then press
Select:
Manual allows you to select a network operator
from the list of operators available in your
current location.
Automatic allows your Vertu phone to select
the network operator that provides the best
signal in your current location.
Confirm SIM service actions
This option allows you to request notification when
your service provider makes changes to
SIM-related services (such as activating GPRS
service).
To change your SIM service action setting:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
To Next Page
Loading...
