Vertu Ascent RHV-3 - Call settings; Call divert; Anykey answer

38
Contact your service provider for more information
about supported data connections and tariffs.
When you have selected GPRS as a data bearer,
the phone automatically uses EDGE instead of
GPRS if this is available in the network.
To define when a GPRS connection is established:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Connectivity and press Select.
> GPRS is highlighted, press Select.
> GPRS connection is highlighted and the
current connection setting is shown, press
Select.
> Scroll to either When needed to connect to the
GPRS network only when you use a function that
needs the GPRS service, or
Always online to
automatically register to a GPRS network when
you switch your phone on, if the network is
available in your location. Press
Select to make
your choice.
To define the GPRS modem settings:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Connectivity and press Select.
> GPRS is highlighted, press Select.
> Scroll to GPRS modem settings and press
Select.
> Scroll to one of the following options then press
Select:
Active access point to select the GPRS
access point.
Edit active access point to modify the
GPRS access point settings.
CALL SETTINGS
Call divert
The call divert feature redirects your incoming calls
to another number, for example your voice mailbox
number.
To manage your call divert settings:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Call settings and press Select.
> Call divert is highlighted, press Select.
> Scroll to one of the following divert options then
press
Select:
Divert all voice calls to forward all calls to
the number you specify.
Divert if busyto forward all calls when you are
in a call.
Divert if not answered to forward all calls to
another number when you do not answer. You
can also set a delay before forwarding takes
place.
Divert if out of reach to forward all calls
when your phone is turned off or out of the
coverage area.
Divert if not available to forward all calls
when you do not answer, your phone is busy or
turned off, or out of the coverage area. You can
also set a delay before forwarding takes place.
Divert all data calls to forward all data calls
to a data mailbox.
> Scroll to one of the following then press Select:
Activate to set up the divert. Highlight either
To voice mailbox or To other num b e r then
press
Select. Enter the divert number or select
a contact from your directory then press
OK.
Cancel to cancel the divert.
Check status to check the current status of
the divert. A progress indicator appears,
followed by an information note indicating if the
option is active and to which number.
To cancel all call diversions:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Call settings and press Select.
> Call divert is highlighted, press Select.
> Scroll to Cancel all diverts and press Select.
Anykey answer
Anykey answer allows you to answer an incoming
call by briefly pressing any key except the
POWER,
SELECTION and E ND keys.
To change the anykey answer setting:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Call settings and press Select.
When a call is diverted your Vertu phone does
not give any indication of an incoming call.
Cancelling all call diverts may affect your
ability to receive voice mail messages.
Some service providers may not allow
cancelling of all diversions. Contact your
service provider for specific details.