EasyManua.ls Logo

Vertu Ascent RHV-3 - 09 Organiser; Alarm clock; Setting the alarm; Cancelling the alarm

Vertu Ascent RHV-3
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
63
09 ORGANISER
Your Vertu phone Organiser has the following
functions:
> Alarm clock
> Calendar
> To -do lis t
> Notes
> Synchronisation
ALARM CLOCK
You can set your Vertu phone to sound an alarm at
a desired time. The alarm will sound even if your
Vertu phone is switched off.
SETTING THE ALARM
To set the alarm:
> From the stand-by display, press Menu.
> Scroll to Organiser and press Select.
> With Alarm clock highlighted, press Select.
> With Alarm time highlighted, press Select.
> Key in the time you want the alarm to sound and
press
OK.
A message confirms that the alarm is on and a
small bell icon is visible on the stand-by display.
CANCELLING THE ALARM
To cancel the alarm:
> From the stand-by display, press Menu.
> Scroll to Organiser and press Select.
> With Alarm clock highlighted, press Select.
> With Alarm time highlighted, press Select.
> Scroll to Off and press OK.
A message confirms that the alarm is off.
TUR N I NG O FF T HE A LA R M
To turn off a ringing alarm:
> When the alarm sounds press Stop.
If your Vertu phone is switched off when the alarm
sounds, a message asks if you want to switch the
phone on. Press
Yes to switch the phone on or
press
No to leave the phone switched off.
ACTIVATING THE SNOOZE FUNCTION
To activate the snooze function:
> When the alarm sounds press Snooze.
> The alarm will sound again in 10 minutes.
> If you leave the alarm ringing, it will ring for
about a minute and then go into snooze mood.
SELECTING A RINGING TONE
To select a ringing tone:
The standard alarm is an ascending chiming
sound. However, you can personalise the alarm by
selecting one of your Vertu ringing tones.
> From the stand-by display, press Menu.
> Scroll to Organiser and press Select.
> With Alarm clock highlighted, press Select.
> Scroll to Alarm tone and press Select.
> Highlight Ringing tone and press Select.
> Scroll to the ringing tone you want to use and
press
Select.
A message confirms that you have selected an
alarm tone.
REPEATING THE ALARM
To repeat the alarm on certain days:
> From the stand-by display, press Menu.
> Scroll to Organiser and press Select.
> With Alarm clock highlighted, press Select.
> Scroll to Repeat alarm and press Select.
> Scroll to Repetition days and press Select.
> Highlight each day and select Mark to repeat
the alarm or
Unmark to cancel the alarm.
> Press Done when you have finished.
> A message confirms that alarm repetition is on.
Do not press Yes when wireless phone use
is prohibited or when it may cause
interference or danger.
If you unmark all days, alarm repetition
switches off.

Table of Contents

Related product manuals