36
Keypad tones to set the volume of your
keypad tones (off=silent, 1=low, 3=high).
Warning tones to set whether your Vertu
phone uses an audible alert for giving you
warnings, for example when the battery is low.
Alert for to define which caller groups you
want your Vertu phone to alert you for when you
receive a call from someone added to a
specified group. If you receive a call from
someone who is not included in a specified
caller group, a calling message appears on the
display, but your Vertu phone remains silent.
To personalise an enhancements profile:
> From the stand-by display, press Menu.
> Scroll to the Profiles menu then press Select.
> Scroll to Enhancements then press Select.
This option is only displayed if an enhancement
has been previously connected.
> Highlight the enhancement you want to configure,
for example,
Headset then press Select.
> Scroll to one of the following options then press
Select to customise the settings:
Default profile to choose the profile you wish
to use when the enhancement is connected to
your Vertu phone.
Automatic answer to answer call
automatically after one ring.
RENAMING A PROFILE
To rename a profile:
> From the stand-by display, press Menu.
> Scroll to the Profiles menu then press Select.
> Scroll to the profile you want to rename then press
Select. You cannot rename the General or
Enhancements profiles.
> Scroll to Profile name then press Select.
> Enter a new name for the profile then press
Options.
> Save is highlighted, press Select.
SETTINGS
The settings menu enables you to control the core
functionality of your Vertu phone. Using this feature
you can define personal shortcuts, adjust time and
date settings, modify phone and call settings,
change your security settings, and restore factory
default settings.
Refer to theChapter 02 "Security" on page 16
chapter for more information.
TIME AND DATE SETTINGS
Time Settings
To adjust your time settings:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Time and date and press Select.
> Clock is highlighted and the current time is
shown, press
Select.
> Scroll to one of the following options then press
Select to customise the time settings:
Show clock to choose if the clock is shown in
the stand-by display when your Vertu phone is
idle.
Set the time to change the current time. Enter
the new time in hh:mm format, and press
OK. If
required, select
am or pm.
Time zone to change the current time zone
setting. Highlight your new time zone then press
Select.
Time format to set the time format as am/pm
or 24-hour format (military time).
Date Settings
To adjust your date settings:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Time and date and press Select.
> Scroll to Date, the current date is shown, press
Select.
> Scroll to one of the following options then press
Select to customise the date settings:
Set the date to change the current date. Enter
the new date in the shown format, and press
OK.
Date format to change the format used to
display the date. Highlight your new date format
then press
Select.
To Next Page
Loading...
