Vertu Ascent RHV-3 - Start-up tone; Security settings; Restore factory settings

41
> Scroll to Phone settings and press Select.
> Scroll to Confirm SIM service actions, the
current setting is shown, press
Select.
> Highlight On to enable SIM service action
confirmations request, or
Off to prevent
notifications, then press
Select.
Start-up tone
You can set your phone to play (or not to play) the
exclusive Vertu start-up tone when the phone is
switched on.
To change your start-up tone setting:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Phone settings and press Select.
> Scroll to Start-up tone, the current setting is
shown, press
Select.
> Highlight On to enable the start-up tone, or Off
to start-up silently, then press
Select.
SECURITY SETTINGS
Refer to the Chapter 02 "Security" on page 16
chapter for more information.
RESTORE FACTORY SETTINGS
You can reset some of the menu settings to their
original values. However, data that you have
entered or downloaded is not deleted. For
example, names and numbers in contacts are not
affected.
To restore the factory settings:
> From the stand-by display, press Menu.
> Scroll to the Settings menu then press Select.
> Scroll to Restore settings and press Select.
> Enter the security code (the default is 12345), and
press
OK.
A message appears in the display confirming that
original settings have been restored.