Vertu Constellation - Give Feedback on Maps

View the route on the map
Select Show route.
Navigate to the destination
Select Show route > Options > Start driving or Start walking.
The route settings affect the navigation guidance and the way the route is displayed
on the map.
Change the settings for a route
1 In the route planner view, open the Settings tab. To get to the route planner view
from the navigation view, select Options > Route points or Route points list.
2 Set the transportation mode to Drive or Walk. If you select Walk, one-way streets
are regarded as normal streets, and walkways and routes through, for example,
parks and shopping centres, can be used.
3 Select the desired option.
Select the walking mode
Open the Settings tab, set the transportation mode to Walk, and select Preferred
route > Streets or Straight line. Straight line is useful on off-road terrain as it
indicates the walking direction.
Use the faster or shorter driving route
Open the Settings tab, set the transportation mode to Drive, and select Route
selection > Faster route or Shorter route.
Use the optimised driving route
Open the Settings tab, set the transportation mode to Drive, and select Route
selection > Optimised. The optimised driving route combines the advantages of both
the shorter and the faster routes.
You can also choose to allow or avoid using, for example, motorways, toll roads, or
ferries.
Give feedback on Maps
Participate in improving the Maps application, and send your feedback.
Select Menu > Maps.
1
Select
> Feedback.
2 Select how likely you are to recommend Maps to other people. You can also give
your reasons.
The feedback is anonymous.
3 Select Submit.
108 Maps
© 2011 Vertu. All rights reserved.