Accessories
Charge the battery
The wall charger supplied with your Vertu phone should be appropriate for your region.
However, you should always check that the electrical rating of the AC outlet is
appropriate for the charger before you attempt to plug it in.
The battery for your Vertu phone requires charging at regular intervals. The battery
does not have to be completely discharged before you can charge it.
1 Connect the charger cable to the micro-USB connector of your Vertu phone. Make
sure the cable is inserted correctly, with the USB symbol facing up.
2 Connect the charger plug to the charger body.
3 Connect the charger plug to a powered AC outlet. After a few seconds, the
animated battery charge indicator on the phone is displayed.
4 When the battery is fully charged, the battery charge indicator stops animating.
Disconnect the charger from your Vertu phone, and then from the wall outlet.
Tip: As an alternative, you can charge the battery by using any of the following:
• A compatible PC (this method also provides data connectivity).
Accessories 121
© 2011 Vertu. All rights reserved.
To Next Page
Loading...
