56
REV. 2.1 22-06-2020
VI.BE.MAC. S.p.A.
Società soggetta a direzione e coordinamento di Jack Europe S.à.r.l.
Via Monte Pastello 7/i, 37057 S.Giovanni LUPATOTO (VR)
Ph. (+39) 045 8778151 - Fax. (+39) 045 8779024
Email: customercare@vbm-grp.com- Website: www.vibemac.com
25. Problem solving
If a skip stitch occours:
• Check the timing
• Check if the thread pulling cam is tensioning the threads when the needle bar is located in
the upper dead centre (see image 14)
• Check the threading of the lower threads one by one, make sure that they’re not knotted
together
• Check if the upper head thread holder is positioned parallel to the sewing head (see image
15)
DISTRIBUTOR FOR:
To Previous Page
Loading...
