EasyManua.ls Logo

Vi.Be.Mac V261 - Introduction

Vi.Be.Mac V261
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 7
REV. 2.1 22-06-2020REV. 2.1 22-06-2020
SAFETY SIGNALS
ELECTRICAL SHOCK DANGER:
BEFORE OPENING THE COVER OR DOING THE OPERATION SWITCH OFF
THE MAIN POWER
MECHANISM MOOVING:
BEFORE DOING THE OPERATION BE SURE THAT THE MACHINE IS
STOPPED AND DISCONNECTED FROM MAIN SWITCH
DANGER:
BE SURE TO FOLLOW THE ISTRUCTION
DANGER:
THE TEMPERATURE WILL BE OVER 70C°-160F°
DON’T REMOVE SAFETY PROTECTIONS
DON’T LUBRIFICATE OR ADJUST WHILE MOVING
TURN OFF THE MAIN SWITCH BEFORE WORKING ON THE MACHINE
THE USE OF EAR PROTECTION IS MANDATORY
IT IS MANDATORY TO USE THE GOGGLES
1. INTRODUCTION
Proper and safe operation of the unit is only ensured if used in accordance with the information
stated in this manual and, in general, in the documentation accompanying the machine. It is
therefore imperative to carefully read and store all relevant documentation.
It is always necessary to ensure that all operators have fully understood the rules of use. The
company is not responsible for any damages to persons or property arising from improper use
of the machine.
Do not remove or damage labels, writing, and warnings on parts of the machine. Should it be
necessary to restore them, contact VI.BE.MAC. S.p.A.
VI.BE.MAC. S.p.A. disclaims any and all liability for a failure to observe the safety and prevention
rules outlined in the various sections of this manual and for any damage caused by improper
use.
The machine covered by this manual has been designed and manufactured in accordance with
applicable laws and the state of the art valid at the time of delivery. It is the responsibility of
the customer to make continuous adjustments to enable its constant compliance with the legal
requirements and regulations in place at the installation site.

All work on the machine (maintenance, adjustments, repairs, cleaning) must be carried out by
appropriately trained personnel and as indicated in this manual.
Storing the manual
This instructions manual is an integral part of the machine and must be stored for any future
reference.
It is advisable to:
Store the manual in an accessible place known to all operators which is protected from moisture
and heat and protected from direct sunlight.
Utilize the manual so as to avoid damaging all or part of its contents: do not remove, tear or
modify parts of the manual for any reason.
In the event of sale or transfer of the machine to another person, this manual and its attachments
must be delivered to the new user.
! ATTENTION !
Please read this instruction manual carefully before using the machine. Anyone using the
machine must be adequately informed about the parts of this instruction manual
For the operations to be carried out.

Related product manuals