4 5
REV. 2.1 22-06-2020REV. 2.1 22-06-2020
37057 S. GIOVANNI LUPATOTO (VR) ITALY - Via Monte Pastello 7/i - Tel: +39 045 8778151/52 Fax: +39 045 8779024 E-mail: sales@vbm-grp.com Website: www.vibemac.com
P.I./C.F. 01264050236 – Cap. Soc. € 2.000.000,00 int. Vers. – Reg. Imprese di Verona 01264050236 – N. REA VR-170441
Società soggetta a direzione e coordinamento di Jack Europe S.à.r.l.
S. p. A.
Declaration of CE Conformity:
Translated Version
The company:
In quality of manufacturer, declares under its responsability that the product:
COMPANY: VIBEMAC MODEL: 2261HP
SERIAL NUMBER: XXXXXXXX MANUFACTURED IN YEAR: 2017 two thousand and
seventeen
DESCRIPTION: feed of the arm unit, 3 needle chain stitch equipped with thread trimmer, puller
device and
low inertia standard setting of the machine needle gauge 6.4mm straight folder
1/4” for
heavy fabbric. Mitsubishi motor XCG 754 20Y and control board XCG MFY 2007
SEWING HEAD: 2261 VIBEMAC 3 Needle Feef O The Arm
SERIAL NUMBER: XXXXXXXX
POWERED BY: SEIKO SEWING MACHINE CO LTD
11-3 IMADO I-CHOME
TAITO KU, TOKIO 111
JAPAN
The present declaration has been issued according to machinery directive 2006/42/CE dated 17
May 2006 and to the following directive:
- Electromagnetic Compatibility 2004/108/CE
As required, CE mark is applied on the machine
PLACE AND DATE
SAN GIOVANNI LUPATOTO,
25/10/2017
C.E.O.
Alberto Guerreschi
VI.BE.MAC. S.p.A.
Via Monte Pastello 7/i
37057 San Giovanni Lupatoto
VERONA - ITALIA
Tel. +39-045-8778151
Fax +39-045-8779024
ORIGINAL INSTRUCTIONS
Thank you for choosing a unit manufactured by VI.BE.MAC. S.p.A.
This unit has been designed and built using state-of-the-art technologies and procedures to
ensure the best reliability over time and, at the same time, to ensure maximum operator safety.
Carefully read and comply with all information in this manual for proper and safe operation of
the unit.
All documentation supplied with the unit - and in particular this manual - must be carefully
preserved for future reference.
This publication or parts thereof may not be reproduced, stored in a storage machine,
transmitted, transcribed or translated into any common or computer language, in any form
or by any electronic, mechanical, magnetic, optical, chemical, manual or other means without
express written authorisation from VI.BE.MAC. S.p.A.
VI.BE.MAC. S.p.A. provides a guarantee with respect to the contents of this publication, with
express prohibition to use this publication itself for other purposes of any commercial, practical,
this publication was drafted.
Guarantee on the correctness of information contained herein is provided on condition that
all the provisions contained in this documentation are strictly observed by the machine user.
Furthermore, VI.BE.MAC. S.p.A. reserves the right to revise this publication and to make
changes to its contents without any obligation to notify any person or organisation.
Said revised publications will be available upon request from VI.BE.MAC. S.p.A.
The original instructions manual was drafted in italian.
To Next Page
Loading...
