Vi.Be.Mac 3022LV User Manual

VI.BE.MAC.S.p.A. 3022LV
Page 1
MAINTENANCE INSTRUCTIONS MANUAL
INTRODUCTION
Thank you for purchasing this
VI.BE.MAC. S.p.A. industrial sewing machine.
Before using this automatic unit, please read the following instructions in order to gain a better understanding of how the machine
operates.
The instructions illustrate the correct working method to follow in complete compliance with current legislation.
· No part of this manual may be copied or reproduced without requesting permission from VI.BE.MAC S.p.A.
· The contents of this manual may be subject to changes without prior warning.
In order to request an additional manual or to request clarifications regarding the contents of this manual, please contact:
UFFICIO TECNICO
VI.BE.MAC. S.p.A
Via Monte Pastello 7/ I
37047 S.GIOVANNI LUPATOTO (VR)
Tel. +39 045 8779051
Fax +39 045 8779024
Email:
vi.be.mac@ sis.it
We are happy to receive any suggestions and/or comments on ways to improve this manual.

Vi.Be.Mac 3022LV Specifications

General

Brand	Vi.Be.Mac
Model	3022LV
Category	Sewing Machine
Language	English

Summary

CONDITIONS OF USE

ORDER OF OPERATIONS

STARTING UP THE MACHINE

STOPPING THE MACHINE

SETTING SEWING SPEED - POSITIONING

LIST OF ERRORS

SETTING CHAIN STITCH CUTTING PARAMETERS

SETTING THE PULLER LIFTING PARAMETER

FINAL AUTOMATIC CYCLE END STOP

INPUT/OUTPUT TEST

ADJUSTING THE SEWING HEAD

NEEDLE BAR HEIGHT

Procedure for setting the correct height of the needle bar at top dead centre.

POSITION AND HEIGHT OF NEEDLE BAR THREAD TAKE UP

Instructions for positioning the needle bar thread take-up eye bar.

NEEDLE BAR MOVEMENT CAM

Guidance on positioning and adjusting the needle bar movement cam.

NEEDLE BAR PENDULUM HEIGHT

CROCHET HOOKS START MOVEMENT CAM

CROCHET HOOK - NEEDLE DISTANCE

Steps to ensure the correct distance between the crochet hook and the needle.

LOOP WIDENING PHASE

CLAMP MOVEMENT CAM

TIP LENGTH

ADJUSTING THE CLAMP HEIGHT

ADJUSTING THE LOWER THREAD PULLER