43
PG PLUS RACK + ZERO AIR
& GC PLUS RACK USER MANUAL
www.vicidbs.com
Version 2.00.0000
Thank you for your cooperation and please contact VICI if anything is not clear or you have further questions.
Please also provide full details of the problem, including the model and serial numbers of your gas generator.
Instructions will then be provided for the service or the return of the unit. If the warranty has expired, or the
fault is due to misuse of the unit, all repair and shipping costs are to be paid by the customer.
WARNING: If the generator needs to be transported, make sure that the water tank
is completely empty. Place the plug (supplied with the unit) on the Oxygen vent at the
rear of the unit. Close the water tank with the cap. Use the ORIGINAL packing material.
The generator should be transported in an upright position; this warning should be
marked at the outside of the shipping box.
IMPORTANT: The manufacturer reserves the right to change or modify its products
without prior notice.
13. SPARE PARTS LIST
13.1. HYDROGEN PART
PART NUMBER DESCRIPTION
DB-H200-043 Deionizer bag holder
DB-H200-005 Water drain outlet+tube (before S/N: PNMS170915368 & PHGS170915444)
DB-RH200-010 Gas / Liquid separator (GLS) for Rack/FID, complete with ttings
DB-10216 Push in connector straight 1/8"
DB-H200-034 Perma Pure for all versions
DB-H200-035 Pressure release valve
DB-H200-036 Gas outlet connector
DB-H200-040 Internal circulation fan
DB-PH200-003 Small Power Supply PG plus/NM plus (100/160/250/300)
DB-PH200-004 Big Power Supply PG plus/NM plus (500/600/1000/1350)
DB-PH200-005 Gas on/off valve PG plus
DB-PH200-007 Display touch screen PG plus and NM plus
DB-H200-042 Display membrane
DB-RH200-001 Air/H2 Button
To Next Page
Loading...
