22
PG PLUS RACK + ZERO AIR
& GC PLUS RACK USER MANUAL
www.vicidbs.com
Version 2.00.0000
7. INSTALLATION AND INITIAL START-UP
7.1. RECEIVING THE GENERATOR
All units have been carefully inspected before transport. Visual checks for damage and functional tests should
be performed upon receipt. Any damage must immediately be noted and reported. The generator must only
be returned according to the shipping instructions provided.
NOTE: Conserve the ORIGINAL packaging is case of a return.
7.2. PACKING LIST
List of items included in the shipment:
PG PLUS RACK H2 PG PLUS RACK H2 + ZERO AIR GC PLUS RACK
RACK 1 1
EXTERNAL TANK 1 1
FILTER FOR INLET AIR 1 1
INSTRUCTION MANUAL
ON USB STICK
1 1 1
DEIONIZER BAG 1 1
WATER DRAIN WITH
FLEXIBLE TUBING
1 1
POWER CABLE 1 1 1
7.3. PLACING THE GENERATOR
The hydrogen generator must be placed on a at, level, vibration- and shock-free surface. Do not place the
generator near a heat source, as this may cause the generator to overheat. The unit should not be in contact
with any other objects on any side, and the air inlet must not be blocked. Leave at least 30 cm of free space
at the rear for ventilation. Do not operate the generator in a sealed or unventilated room, near open ames
or other sources of ignition. Do not operate the generator at temperatures below 0°C (32°F). Operation is
guaranteed at temperatures between +15°C and +35°C or between 59°F and 95°F.
CAUTION: Normal precautions as for any hydrogen supply should be taken when
using the generator.
DO NOT use in sealed or unventilated rooms.
DO NOT use near open ames or other sources of ignition.
DO NOT use near easily ammable materials.
To Next Page
Loading...
