G0202MKD3 EN12
3.2 Moving the mower into working
position
Attention:
Never mow with the mowing unit in (near) transport
position, this causes severe damages to the machine
(excluding any warranty)!
1
Adjust the Accord quick hitch frame vertically (see 3.1).
If necessary correct this height using the 3-pt front link-
age! If desired you can limit this position using the
optional depth limiting chain (see 6.3).
2
Lower the mower onto the ground using the hydraulic
valve control lever.
3
Put cylinder into floating position.
3.3 Lifting the mower into headland
position
Pressurize lifting cylinder (42) through control lever. Now the
mowing unit is sufficiently lifted to enable manoeuvring on the
headland without problems.
To continu mowing move the control lever back into floating
position and the mowing unit will return to mowing position.
MD0208
42
To Next Page
Loading...