Parking and Storage
52
Activate the tractor's hydraulics and lower the machine down to the
ground.
Fold the support leg down as shown.
Check that the parking catch is placed in the notch shown.
• If the parking catch cannot be placed in the notch shown, it may be
because the suspension is not at the correct height above the
ground.
»Adjusting the hitch« page 29
When the parking catch is locked in the notch, carry out the following:
Lower the machine's hitch to the ground and stow it.
Check that the machine's hydraulic system is not under pressure.
Disconnect the hydraulic connections.
Disconnect the top link and both lift arms.
To Next Page
Loading...
