Vicon Extra 332 - Page 74

Maintenance
74
 Inspect both universal joints for wear.
 Check the universal joint for broken or loose bolts.
 Replace the broken bolts.
 Apply Loctite 242 or a similar product to all bolts.
 Fit the bolts and tighten to the torque shown.
 If there are loose bolts the following procedure should be followed:
 Remove and clean the bolts.
 Apply Loctite 242 or a similar product to all bolts.
 Fit the bolts and tighten to the torque shown.
Universal joint
Bolts
79 Nm
58 ft/lb
Loctite
242
Loctite 242
Bolts
79 Nm
58 ft/lb
Loctite
242
Loctite 242