Vicon RF121 R - Winter Storage

51
EN
16657715_en 05/2006
5.11 Winter storage
 Clean the baler of crop remains and dirt,
 Check the round baler for wear and damage
and have it repaired,
 Position the control box at the envisaged point
under the front hood.
 Release the net separating knife.
WARNING!
Do not reach into the area of the net
separating knife. Danger of injury!
 Clean all roll chains thoroughly and re-oil,
 Lightly oil the Opticut cutting blades,
 Lubricate machine according to lubrication
schedule,
 Change the gear oil,
 Position the baler so that it is stable and prevent
from rolling away using wheel chocks,
 Never allow children to play on or near the
machine.