Page 81
MNVADCJ01_1729_EN
6.8.6.2 Random Patrol
: start random patrol
: end random patrol
: setup random patrol, by entering a special menu
Select the various items and insert the values within the
allowed range.
: movement speed from 1 (minimum) to 255
(maximum)
: length of pause on reaching a position.
For each of these parameters, a minimum and maximum
value must be inserted.
6.8.7 Auxiliary relays
(1÷3): activates the relay
(1÷3): deactivates the relay
6.8.8 Positioning limits
: sets the horizontal positioning limit to the right
: sets the horizontal positioning limit to the left
: sets the upper vertical positioning limit
: sets the lower vertical positioning limit
: enables the positioning limits
: disables the positioning limits
6.8.9 Other functions
÷: selects the speed curve. If pan & tilt movement is irregular (too quick or insufficient
rea
ction to joystick movements) we recommend selecting the four speed curves to find the most suitable one.
/: activates/deactivates the function recalling the home function.
: remote receiver reset.
To Next Page
Loading...