Videotec DCJ - Page 210

Page 80
MNVADCJ01_1729_EN
6.8.4 Autopan
: autopan on
: stop autopan
: autopan setup, by entering a special menu:




Select autopan speed and dwell time and insert a value
within the allowed range.
The speed can vary from 1 (minimum) to 255 (maximum).
Time is expressed in minutes. 255 allows the autopan to
stay on without time limits.

Note: preset positions 63 and 64 represent the autopan limits.
6.8.5 Preset, scan, home
(1÷64): store the current position as preset position number X
(1÷64): movement towards the previously stored preset position X
: setup preset, by entering a special menu




Insert a value within the allowed range.
The speed can vary from 1 (minimum) to 255 (maximum).
: movement towards the Home position (position 1).
: setup parking time, by entering a special menu:




Insert a value within the allowed range.
The time is expressed in minutes.
6.8.6 Patrol
The Eneo pan & tilt has two types of patrol: standard patrol and random patrol.
6.8.6.1 Standard Patrol
: start standard patrol
: end standard patrol
: setup standard patrol, by entering a special menu




Select the various items and insert the values within the
allowed range.
 indicates the series of consecutive
positions for the patrol
: movement speed from 1 (minimum) to 255
(maximum)
: length of pause on reaching a position
