Videotec DCJ - Page 244

Page 114
MNVADCJ01_1729_EN
6.19.5 Setup
The dome can be set up by pressing a combination of keys or by inserting a special code.
For all setup operations the keyboard must be enabled to perform the receiver setup (menu
).
6.19.5.1 Exposure Control
 AE mode
 priority
 flickerless shutter
 increase shutter value
decrease shutter value
increase iris open, iris open
increase iris close, iris close
manual
increase shutter value
decrease shutter value
increase iris open, iris open
increase iris close, iris close
increase gain
decrease gain
maximum positive gain
maximum negative gain
6.19.5.2 Other setups
Autofocus: on, off, one shot
White balance:
auto, one shot
Exposure:
lighter, darker, default
Autopower mode:
enable, disable
Digital zoom:
on, off
synchronise internal video
(0÷359): synchronise external video (X phase in degrees)
6.19.6 Other functions
 autoflip
autofocus on
reset dome