Viessmann B1HF - Mounting the Boiler on the Pre-Plumbing Jig or Mounting Frame; Removing the Front Panel; Mounting the Boiler and Making Connections

15
Removing the front panel
3.
2.
1.
2x
Fig. 5
1. Unlock the front panel on the underside (push in),
using a screwdriver or similar tool.
2. Swivel the front panel forwards slightly and lift
away upwards.
Mounting the boiler on the pre-plumbing jig or mounting frame
Note
Various installation components can be found in a sep-
arate pack. Keep the installation components safe, as
they will be required for later installation.
Installation sequence
Mounting the boiler and making connections
6167586
Installation