ViewSonic IFP50-3 Series - Declaration of Rohs2 Compliance

129
dŚĞĨŽůůŽǁŝŶŐŝŶĨŽƌŵĂƟŽŶŝƐŽŶůLJĨŽƌhͲŵĞŵďĞƌƐƚĂƚĞƐ
The mark shown to the right is in compliance with the Waste Electrical
and Electronic Equipment Directive 2012/19/EU (WEEE). The mark
indicates the requirement NOT to dispose of the equipment as unsorted
municipal waste, but use the return and collection systems according to
local law.
ĞĐůĂƌĂƟŽŶŽĨZŽ,^ϮŽŵƉůŝĂŶĐĞ
dŚŝƐƉƌŽĚƵĐƚŚĂƐďĞĞŶĚĞƐŝŐŶĞĚĂŶĚŵĂŶƵĨĂĐƚƵƌĞĚŝŶĐŽŵƉůŝĂŶĐĞǁŝƚŚŝƌĞĐƟǀĞ
ϮϬϭϭϲϱhŽĨƚŚĞƵƌŽƉĞĂŶWĂƌůŝĂŵĞŶƚĂŶĚƚŚĞŽƵŶĐŝůŽŶƌĞƐƚƌŝĐƟŽŶŽĨƚŚĞƵƐĞ
of certain hazardous substances in electrical and electronic equipment (RoHS2
ŝƌĞĐƟǀĞͿĂŶĚŝƐĚĞĞŵĞĚƚŽĐŽŵƉůLJǁŝƚŚƚŚĞŵĂdžŝŵƵŵĐŽŶĐĞŶƚƌĂƟŽŶǀĂůƵĞƐŝƐƐƵĞĚ
ďLJƚŚĞƵƌŽƉĞĂŶdĞĐŚŶŝĐĂůĚĂƉƚĂƟŽŶŽŵŵŝƩĞĞ;dͿĂƐƐŚŽǁŶďĞůŽǁ
Substance Proposed Maximum
ŽŶĐĞŶƚƌĂƟŽŶ
ĐƚƵĂůŽŶĐĞŶƚƌĂƟŽŶ
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
,ĞdžĂǀĂůĞŶƚŚƌŽŵŝƵŵ;ƌϲЀͿ 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers
(PBDE)
0.1% < 0.1%
Bis (2-ethylhexyl) phthalate (DEHP) 0.1% < 0.1%
Butyl benzyl phthalate (BBP) 0.1% < 0.1%
Dibutyl phthalate (DBP) 0.1% < 0.1%
Diisobutyl phthalate (DIBP) 0.1% < 0.1%
Certain components of products as stated above are exempted under the Annex
///ŽĨƚŚĞZŽ,^ϮŝƌĞĐƟǀĞƐĂƐŶŽƚĞĚďĞůŽǁ
• Copper alloy containing up to 4% lead by weight.
• >ĞĂĚŝŶŚŝŐŚŵĞůƟŶŐƚĞŵƉĞƌĂƚƵƌĞƚLJƉĞƐŽůĚĞƌƐ;ŝĞůĞĂĚͲďĂƐĞĚĂůůŽLJƐĐŽŶƚĂŝŶŝŶŐ
85% by weight or more lead).
• Electrical and electronic components containing lead in a glass or ceramic other
than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or
ceramic matrix compound.
• Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC
or higher.