ViewSonic IFP50-3 Series - Settings - HDMI & VGA Input Source; Audio Settings

4343
^ĞƫŶŐƐͲ,D/Θs'/ŶƉƵƚ^ŽƵƌĐĞ
Press MENUŽŶƚŚĞƌĞŵŽƚĞĐŽŶƚƌŽůŽƌƐĞůĞĐƚƚŚĞƐĞƫŶŐŝĐŽŶŶĞdžƚƚŽƚŚĞŝŶƉƵƚ
source in /ŶƉƵƚ^ĞƫŶŐƐ to launch the ^ĞƫŶŐƐŵĞŶƵ^ĞƫŶŐƐŝŶĐůƵĚĞAudio,
Screen, Display, and Adjust.
ƵĚŝŽ^ĞƫŶŐƐ
1. Press T on the remote control and select the Audio menu.
2. Press T
/S/W/XŽŶƚŚĞƌĞŵŽƚĞĐŽŶƚƌŽůŽƌĚŝƌĞĐƚůLJƚŽƵĐŚƚŚĞŽƉƟŽŶƚŽƐĞůĞĐƚŝƚ
3. ĚũƵƐƚƚŚĞsŽůƵŵĞĂƐƐdƌĞďůĞĂŶĚĂůĂŶĐĞĚŝƌĞĐƚůLJďLJƚŽƵĐŚŝŶŐĂŶĚĂĚũƵƐƟŶŐ
each value, or with the remote control by pressing ENTERƚŽĂĚũƵƐƚƚŚĞŽƉƟŽŶ
4. Touch the Mute slider directly to enable/disable mute, or press
;DƵƚĞͿ on the
remote control.
5. Press EPG/BACK on the remote control, or touch a blank area outside of the
menu to exit.