56
41018
1. Press to select the function
2. Press to select the source
The source can assume the following values:
• from 1 to 16 in the case of a vertical system
• from 1 to 6000 in the case of an expanded system
• Zero disables the function
• To set the local entrance panel lock control as the source, press the key button on art. 41019 when entering the
control.
3. Press to set the actuator activation time
Setting the actuator activation time and the related source, i.e. the relay ID
5. Press to set the control activation time
6. Select the value
7. Press to confirm
8. Press to save the setting and return to the previous menu
Time frames
Conversation
300
Answer
30
Self-start
F1
F2
Keyboard Relay
1
Settings
Source
5
Activation time...
1
Back
2
Settings
Source
5
Activation time...
1
Back
3
Settings
Destination
Ta..
Activation time...
1
Back
5
Act. Time
60
90
120
180
254
Back
8
Act. Time
1
2
5
10
30
60
6
7
To Next Page
Loading...
