59
41018
Common locks
Note: The function is available from firmware version 1.63 (also after update); connected to an electronic unit (41002 -
41005) with firmware version 1.81 or later.
On an outdoor station, the parameter allows the configuration of the lock opening in common with one or more outdoor
stations.
Configuration of common locks
Preliminary procedure
From the outdoor station whose lock
opening you wish to share, make a call
towards any indoor station installed on the same
bus, where the outdoor station concerned by the
programming is situated.
Then, from the indoor station, press the lock release button
(this way the lock action control will be sent to the calling
entrance panel, and the system will register the entrance
panel to share).
< 3m
Common locks
Start Procedure
Del. All
Back
2
1
3
1. Select "Start procedure”
2. Press to confirm.
3. Press the lock release button on the indoor station called previously.
Common locks
ID: 01 Vertical
Configuration completed
successfully
Common locks
In progress...
Configuration in progress
(max 3 minutes)
To Next Page
Loading...
