To Next Page

To Previous Page

34 - ENGLISH

5.5.6

Remove the smart card.

The LED turns green, waiting for a smart

card to cancel.

Card being

cancelled

Card being

cancelled

5.5.7

Insert the smart card to be cancelled.

The device waits for a smart card to can-

cel for about 15 seconds, after which it

exits the procedure. Exiting is signalled by

the LED switching off.

5.5.5

If the smart card is recognised, the LED

switches off.

5.5.4

Insert a programmed smart card to

enable the procedure.

If the smart card is not inserted within

15 seconds, the LED turns off and the

device exits the procedure.

Card

already

programmed

Card

already

programmed

If the LED blinks red it means the smart

card was not recognised.

Remove the incorrect smart card and

insert the correct one.

5.5.3

Press the front button again. The LED

turns red.

Vimar Plana Instruction Handbook

Other manuals for Vimar Plana