ENGLISH - 13
The system has two operating modes:
Operation without a configurator
All functions are controlled by means of the dip-switch set-
tings and using the MASTER and/or SLAVE smart cards.
Operation with a configurator and PDA
(IrDA interface)
All functions are controlled by means of a PDA.
Operation
Operation without a configurator
The system can function in two ways:
1. Device and access control in the hotel sec-
tor:
- Operation with a MASTER smart card (2 levels) - see
ch. 4, pg. 15.
A smart card programmed as a MASTER is needed to per-
form any operation (initialising, programming, duplicating,
cancelling, changing the code, synchronising readers).
2. Device and access control in the residential
and services sectors:
- Operation without a MASTER smart card (1 level) - see
ch. 5, pg. 24.
All enabled smart cards can be used to perform any
operation (initialising, programming, duplicating, cancelling,
changing the code, synchronising readers).
To Next Page
Loading...
Need help?
General
