Vimar Plana - 8 Reader Operating Mode Without a Configurator; Activating the Irda Port (Reader in Without Configurator Operating Mode)

54 - ITALIANO
8.1.1
Press the front button.
The LED blinks in the sequence red-off-
green.
8.1.2
Press the front button again. The LED
turns yellow.
8.1.3
Wait for the LED to turn red, then insert
the MASTER smart card to enable the
procedure.
If the MASTER smart card is not inserted
within 15 seconds, the LED turns off and
the device exits the procedure.
MASTER
card
MASTER
card
8.
Reader operating mode without a con-
figurator
8.1
Activating the IrDA port (reader in
“without configurator” mode)
This procedure enables the reader to communicate with a
handheld.