Vimar Plana - Page 116

50 - ENGLISH
6.7.4
Insert a MASTER smart card to enable
the procedure.
If the MASTER smart card is not inserted
within 15 seconds, the LED turns off and
the device exits the procedure.
MASTER
card
MASTER
card
6.7.2
Press the front button. The LED turns
yellow.
6.7.3
Press the front button again. The LED
turns red.
6.7.6
Remove the MASTER smart card.
The LED turns green.
MASTER
card
MASTER
card
If the LED blinks red it means the
MASTER smart card was not recognised.
Remove the incorrect smart card and
insert the correct one.
MASTER
card
MASTER
card
6.7.5
If the smart card is recognised, the LED
switches off.