Vimar Plana - Page 93

ENGLISH - 27
5.2.6
When the LED turns off, the smart card
has been programmed.
5.2.5
Insert a smart card to program.
1 2 3
4 5 6
7 8
ON
5.2.8
To exit the procedure, place dip-switch 1 in
the OFF position. The LED switches off.
5.2.7
Remove the smart card.
The LED turns green again, waiting for
other smart cards to program.
To program additional smart cards,
repeat the procedure from step 5.2.5.