To Next Page

To Previous Page

32 - ITALIANO

5.4.5

Remove the smart card.

The LED turns green, waiting for the

smart card to program as a duplicate.

5.4.6

Insert the smart card to be programmed

as a duplicate.

The device waits for a smart card to pro-

gram for about 15 seconds, after which it

exits the procedure. Exiting is signalled by

the LED switching off.

5.4.7

When the LED turns off, the duplicate

smart card has been programmed.

5.4.3

Wait for the LED to turn red (after about

15 seconds), then insert the programmed

smart card to be duplicated.

If the MASTER smart card is not inserted

within 15 seconds, the LED turns off and

the device exits the procedure.

Card

already

programmed

Card

already

programmed

If the LED blinks red it means the smart

card was not recognised.

Remove the incorrect smart card and

insert the correct one.

5.4.4

If the smart card is recognised, the LED

switches off.

Vimar Plana Instruction Handbook

Other manuals for Vimar Plana