VIPA System 300S - About this Manual

VIPA, SLIO, System 100V, System 200V, System 300V, System
300S, System 400V
, System 500S and Commander Compact are
registered trademarks of VIPA Gesellschaft für Visualisierung und
Prozessautomatisierung mbH.
SPEED7 is a registered trademark of profichip GmbH.
SIMATIC, STEP, SINEC, TIA Portal, S7-300 and S7-400 are regis-
tered trademarks of Siemens AG.
Microsoft and Windows are registered trademarks of Microsoft Inc.,
USA.
Portable Document Format (PDF) and Postscript are registered trade-
marks of Adobe Systems, Inc.
All other trademarks, logos and service or product marks specified
herein are owned by their respective companies.
Contact your local VIPA Customer Service Organization representa-
tive if you wish to report errors or questions regarding the contents of
this document. If you are unable to locate a customer service centre,
contact VIPA as follows:
VIPA GmbH, Ohmstraße 4, 91074 Herzogenaurach, Germany
Telefax: +49 9132 744-1204
EMail: documentation@vipa.de
Contact your local VIPA Customer Service Organization representa-
tive if you encounter problems with the product or have questions
regarding the product. If you are unable to locate a customer service
centre, contact VIPA as follows:
VIPA GmbH, Ohmstraße 4, 91074 Herzogenaurach, Germany
Tel.: +49 9132 744-1150 (Hotline)
EMail: support@vipa.de
1.2 About this manual
This manual describes the SPEED7 CPU 314-6CF03 of the CPU
from VIPA. It contains a description of the construction, project imple-
mentation and usage.
Product Order no. as of state:
CPU-HW CPU-FW DPM-FW
CPU 314ST 314-6CF03 1 V3.6.0 V3.1.2
The manual is targeted at users who have a background in automa-
tion technology
.
Trademarks
Information product
support
Technical support
Objective and contents
Target audience
VIPA System 300S General
About this manual
HB140 | CPU | 314-6CF03 | GB | 16-43 7