The manual must be available to all personnel in the
n project design department
n installation department
n commissioning
n operation
CAUTION!
The following conditions must be met before using
or commissioning the components described in
this manual:
– Hardware modifications to the process control
system should only be carried out when the system
has been disconnected from power!
–
Installation and hardware modifications only by
properly trained personnel.
– The national rules and regulations of the respective
country must be satisfied (installation, safety,
EMC ...)
National rules and regulations apply to the disposal of the unit!
Documentation
Disposal
VIPA System 300S General
Safety information
HB140 | CPU | 314-6CF03 | GB | 16-43 9
To Next Page
Loading...
